Motion Control Suspension made in the USA rear ride height adjusters are manufactured from hi-grade aircraft aluminum & hard anodized to suit a spring ID of 60mm, 2.25 or 2.5 inches. These will not fit OEM spring diameters.

Available to suit BMW model G8X variant models including M-series that retain the OEM inboard rear spring location. These have a mono-ball bearing allowing for spring articulation as the suspension moves through its travel. This helps to eliminate spring noise during suspension movement & reduces binding for a more consistent ride quality.

Total range of ride height adjustment is approximately 45mm. The adjuster is fitted above the spring & in place of the OEM spring seat mounted on the chassis. These can be serviced.

The unit is adjusted by the use of an in-hex socket through the bottom opening of the rear lower arm/spring seat position. We advise you lift both rear wheels off the ground to make the adjustment easier. No more issues trying to fit pin tools or c-spanners to adjust the ride height with limited space. 

These have been designed to handle motorsport applications. 

Coil springs are sold separately.

Price shown is per pair (2 required per car) & excludes GST. These items are included if you purchase the Motion Control Suspension Car Set or rear shocks only for non-coil over systems.